Peerless Music is extremely proud to be the authorised Aussie dealer for Mattoverse Electronics. Pedals & Noise Generators handmade in small runs by one guy in Wisconsin.
SWELL DELAY (RED)
The Swell Delay is an analog sounding digital delay with a very fun and expressive foot-controllable swell feature (via momentary foot-switch).
Controls are: Delay Time / Repeats / Mix / Swell Rate (ie how fast the swell happens)
Max delay time before some noise is 500-600ms
Swell Delay Instructions
Bypass: Turns the delay effect on/off. True hardwire bypass when off
Time: Turn clockwise to increase the length of the delay. Clean delay times up to around 500-600ms are available, after that you enter the “noise zone” where delay times approaching 1 second are available, but with additional noise.
Swell Rate: This control sets how quickly the swell happens when you press and hold the momentary swell footswitch. Turning the control clockwise results in the swell coming on slower, at the highest settings it will work like a hold, continuing the repeats but not going into self oscillation. Note: The Time ans Swell Rate controls are somewhat interactive. For example, short delay times will swell more quickly than long delay times. Adjust Swell Rate accordingly based on the setting of you Time control.
Mix: Sets how much of the delayed instrument signal is mixed with your clean analog signal path. Tuen clockwise to increase the mix of the delay signal.
True Bypass / Neutrik Jacks
Standard Center-Pin Negative 9VDC Power ONLY (not included). Current draw is approximately 34mA
Enclosure Dimensions – 4.67″ x 3.68″ x 1.39″