This Heavy Earth Chvrchbvrner v2

Peerless Music is proud to be the Authorised Aussie dealer for The Heavy Earth: Founded in April of 2021, THISHEAVYEARTH brings a focus on versatility to classic and original circuit designs and paired with looks that kill. Designed with the tone chaser in mind, these builds offer countless knobs, dip switches, and toggles to sculpt your sound for any style of music, as long as it’s crust, black, doom, or death… but we are sure you can use them for yacht rock too.

CHVRCHBVRNER V2

Just when you thought it couldn't get more evil…

Adjust the cascading gain stages to get the classic black metal tone or crank them to get crazy high gain riffage.

This is not just a blackened thrash machine, there are so many usable tones available with the expanded active EQ controls allow you to dial in those 'blues lawyer' tones as well as compliment your death and doom rigs.

Consider this in the category of effects where there is so much you can do, but if you just dime every control, that won't get you there. The tweaking is worth that perfect drive/distortion sound. Throw in the blend… now we can stack it.

side note: this product has no association with the djent/progressive metal song or the band.

CONTROLS

• Level – Controls the output volume.
• Mode (Footswitch) – Changes the character of the first gain stage. Applies additional gain and restructures the low mids.
• Blend – Mix between 100% buffered dry signal and 100% wet signal to bring back the dynamics of your clean signal.
• Clean (Internal Trim) – Adjust the amount of gain on the dry signal side of the blend.
• Pre – Controls the amount of the first opamp gain stage. Enable soft clipping DIP 1 for a more classic overdrive.
• Post – Controls the amount of gain saturation into the hard clipping section. If you experience oscilation with passive pickups at higher gain settings, place a buffer in front of the pedal.
• High – Roll off the treble frequencies.
• Mid – Cut/boost the mid frequencies.
• Low – Cut/boost the bass frequencies.
• Pres(ence) – Controls the upper mid-range frequencies.
• Tight – Controls the pre-gain low end frequencies.
• Clip – Adjust the amount of hard clipping saturation. This was the bottom side toggle in v1.
• Clip (DIP) (Internal Trim) – Toggle each to turn on/off soft clipping in the gain stage. Default setting is both on.
• Bypass LED Brightness (Internal) – Adjust overall brightness of front LED. Default setting at minimum (full CCW).

POWER

18VDC – CENTER NEGATIVE

This product can accept up to 18VDC supply input for additional headroom.

CONSUMPTION

28mA

SWITCHING

TRUE BYPASS Soft click (1.1KGf) mechanical 3PDT