Mozztronics TD-800 Tube Driver

PRODUCT DESCRIPTION

Peerless Music is proud to be an authorised dealer for Mozztronics: Effects pedals for guitar and bass, hand made in Australia by electrical engineer and musician Andrew Macdonald.

TD-800 TUBE DRIVER

One of our favourite amps is the 800 British amp, model 2203.

This is a beast of an amp, which sings when it is played loud.

We took the essence of the preamp circuit from the amp and fitted it inside a pedal. We use an actual 12AX7 tube inside just as the amp does, and we run the tube at proper amp high voltage. We’ve gone old school here, we use circuits that were used to generate high voltage in old time television sets to generate the high voltage for the tube in this pedal.

This pedal does low to medium drive and is great for low to heavy crunch. Turn up the gain and the grit these amps are known for appears. Turn the output volume up to slam the front end of your amp and hear it sing.

This pedal responds like an amplifier would, roll the guitar volume back and the pedal responds, dig in hard on the strings and the pedal responds. We here at Mozztronics like to think of this pedal as an extension of your amplifier.

GAIN controls the amount of overdrive from clean-ish to a heavy crunch

BASS, MID and TREBLE are the 3 knob tone stack as found in the actual 2203 amp

VOLUME adjusts the overall output volume of the pedal. There is a lot of output available here, Start with output volume at 9 o’clock.

As with our other Tube Drive pedals (TD-900 and TD-900N) we power this pedal from an external 15VAC to 16VAC supply.

Mozztronics uses the industry standard 2.1mm socket for the power supply connection.

Power is from an external 15VAC 0.4A plugpack.